【米尔瑞萨RZ/G2L开发板-试用体验】4g模块上网

一个接插件的玩笑

上次开机后，发现一个问题想看背面标识翻起时发现板卡就掉电了，测试了一下12V电源的插头发现无论如何弯折都没有问题，然后查看《MYC-YG2LX 硬件设计指南-1.0.pdf》中的电源接口

果断找来一个DC公头将VCC接到1，GND接到6.然后随意翻动板卡，板卡再也不和开玩笑了。

说回正题硬件连接

硬件连接上板卡，USB设备简单直接上就行。

驱动加载

查看VID和PID

其中： 2c7c:0125 EC20的VID和PID

dmesg查看kernel加载模块情况

AT指令初步测试

查询信号强度

28是信号质量，范围在0~31之间（99表示无信号），数值越大，信号越大

查询卡是否识别

READY代表就绪

查询运营商

移动卡

1. root@myir-yg2lx:~# quectel-CM -s cmnet &
   
2. [1] 12218
   
3. root@myir-yg2lx:~# [01-01_00:23:02:255] Quectel_QConnectManager_Linux_V1.6.0.16
   
4. [01-01_00:23:02:257] Find /sys/bus/usb/devices/1-1.1 idVendor=0x2c7c idProduct=0x125, bus=0x001, dev=0x005
   
5. [01-01_00:23:02:257] Auto find qmichannel = /dev/cdc-wdm0
   
6. [01-01_00:23:02:258] Auto find usbnet_adapter = wwan0
   
7. [01-01_00:23:02:258] netcard driver = qmi_wwan, driver version = 5.10.83-cip1-yocto-standard
   
8. [01-01_00:23:02:258] ioctl(0x89f3, qmap_settings) failed: No such file or directory, rc=-1
   
9. [01-01_00:23:02:259] Modem works in QMI mode
   
10. [01-01_00:23:02:271] cdc_wdm_fd = 7
    
11. [01-01_00:23:02:360] Get clientWDS = 7
    
12. [01-01_00:23:02:393] Get clientDMS = 1
    
13. [01-01_00:23:02:424] Get clientNAS = 2
    
14. [01-01_00:23:02:457] Get clientUIM = 1
    
15. [01-01_00:23:02:488] Get clientWDA = 1
    
16. [01-01_00:23:02:521] requestBaseBandVersion EC20CEHDLGR06A09M1G
    
17. [01-01_00:23:02:649] requestGetSIMStatus SIMStatus: SIM_READY
    
18. [01-01_00:23:02:649] requestSetProfile[1] cmnet///0
    
19. [01-01_00:23:02:713] requestGetProfile[1] cmnet///0
    
20. [01-01_00:23:02:744] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
    
21. [01-01_00:23:02:777] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
    
22. [01-01_00:23:02:777] ifconfig wwan0 0.0.0.0
    
23. [01-01_00:23:02:792] ifconfig wwan0 down
    
24. [01-01_00:23:03:129] requestSetupDataCall WdsConnectionIPv4Handle: 0x87071740
    
25. [01-01_00:23:03:257] ifconfig wwan0 up
    
26. [01-01_00:23:03:270] busybox udhcpc -f -n -q -t 5 -i wwan0
    
27. udhcpc: started, v1.31.1
    
28. udhcpc: sending discover
    
29. udhcpc: sending discover
    
30. udhcpc: sending discover
    
31. udhcpc: sending discover
    
32. udhcpc: sending discover
    
33. udhcpc: no lease, failing
    
34. [01-01_00:23:18:619] File:ql_raw_ip_mode_check Line:127 udhcpc fail to get ip address, try next:
    
35. [01-01_00:23:18:620] ifconfig wwan0 down
    
36. [01-01_00:23:18:635] echo Y > /sys/class/net/wwan0/qmi/raw_ip
    
37. [01-01_00:23:18:635] ifconfig wwan0 up
    
38. [01-01_00:23:18:646] busybox udhcpc -f -n -q -t 5 -i wwan0
    
39. udhcpc: started, v1.31.1
    
40. udhcpc: sending discover
    
41. udhcpc: sending select for 10.140.144.114
    
42. udhcpc: lease of 10.140.144.114 obtained, lease time 7200
    
43. RTNETLINK answers: File exists

复制代码

查看一下ip地址，

轻松4g上网。

能上网是真的很酷

Hello,我看到你焊接DC12V，官方那个没供电吗？

rx-ted 发表于 2023-7-8 20:13
Hello,我看到你焊接DC12V，官方那个没供电吗？

有供电的