This is an RL-USB-Host Human Interface Device (HID) usage example.

Example functionality:
 - Clock Settings:
   - XTAL   =  12 MHz
   - PLL0   = 400 MHz
   - PLL1   =  48 MHz
   - CCLK   = 100 MHz
   - USBCLK =  48 MHz

This example shows how to use USB Keyboard as terminal input to 
the device and it uses Graphic LCD as terminal output.

The Measure example is described in detail in the Getting Started
User's Guide.

The HID_KBD program is a standalone application loaded into
on-chip flash and available for one target:

MCB1700:   Standalone application for Keil MCB1700 Board using
           USB Keyboard and Graphic LCD as user interface.

Note: Jumpers position:
         - "D-"    -> HOST position (3-4 shorted)
         - "D+"    -> HOST position (3-4 shorted)
         - "AD0.2" -> ON
