This is an RL-USB-Host and RL Flash File System file manipulation example.
You can create, read, copy, delete files from the Mass Storage 
Device and format the device. 

Example functionality:
 - Clock Settings:
   - XTAL   =  12 MHz
   - PLL0   = 400 MHz
   - PLL1   =  48 MHz
   - CCLK   = 100 MHz
   - USBCLK =  48 MHz

 - Communication Interface Settings:
   - UART1: 115200 baud, 8 data bits, no parity, 1 stop bit

The MSD_FILE program is a standalone application loaded into
on-chip flash and available for one target:

MCB1700:   Standalone application for Keil MCB1700 Board using
           COM port as a communication interface.

Note: Jumpers position:
         - "D-"    -> HOST position (3-4 shorted)
         - "D+"    -> HOST position (3-4 shorted)

Documentation on the Web: 
  http://www.keil.com/support/man/docs/rlarm/rlarm_fs_ex_msd.htm
