The Memory project is a demo program for the Keil MCB1000 Board 
using a NXP LPC134x Microcontroller.


Example functionality:                                                   
 - Clock Settings:
   - XTAL   =  12 MHz
   - SYSPLL =  72 MHz
   - USBPLL =  48 MHz

It demonstrates an USB Memory based on USB Mass Storage Class.

The USB Memory is automatically recognized by the host PC
running Windows which will load a generic Mass Storage driver.

The Memory program is available for the following target:
  MCB1000 RTX: configured for on-chip Flash ROM - RTX version
              (used for production or target debugging)
