The Memory project is a demo program for the Keil MCB4300 Board

It demonstrates an USB Memory based on USB Mass Storage Class.
SD/MMC Card inserted in the target is used for the actual Memory.

The USB Memory is automatically recognized by the host PC running
Windows which will load a generic Mass Storage driver.

The Memory program is available for the following targets:
  LPC4357_USB0 Flash:        configured for internal Flash
                            (used for production or target debugging)
  LPC4350_USB0 Ext. Flash:   configured for external Flash
                            (used for production or target debugging)
  LPC4357_USB1 Flash:        configured for internal Flash
                            (used for production or target debugging)
  LPC4350_USB1 Ext. Flash:   configured for external Flash
                            (used for production or target debugging)
