The HID project is a demo program for the Keil MCB2140 Board 
using a NXP LPC214x Microcontroller.

Example functionality:                                                   
 - Clock Settings:
   - XTAL                   =  12 MHz
   - processor clock = CCLK =  60 MHz
   - USB clock              =  48 MHz

It demonstrates an USB HID (Human Interface Device):
  - 8 LEDs (LED0..7)
  - 1 Push Button (INT)

The USB HID is recognized by the host PC running Windows
which will load a generic HID driver. The board LEDs
and Push Buttons can then be accessed from the PC
through a custom HID Client Program.

The HID program is available for the following target:
  MCB2140 RTX: configured for on-chip Flash ROM - RTX version
              (used for production or target debugging)
