
The Confidence Test project tests some of the interfaces and 
components of the Keil 'MCBTMS570' Evaluation Board

Example functionality:                                                   
 - Clock Settings:
   - XTAL  =  16 MHz
   - CCLK  = 160 MHz

 - 6 LEDs blink with fixed speed
 - push buttons gerenate a beep 
 - AD value for Temperature and Light are displayed on the GLCD 
 - AD value for differential sensor inputs are displayed on the GLCD 
 - SD-Card can be detected and size is displayed
 - Memory test:
   - external 512KB RAM
   - EEPROM (via SPI)
   - FRAM (via SPI)
 - Air pump and valve output can be controlled
 - Solenoid outputs and Relay can be controlled

This Confidence Test application is configured for the on-chip flash
and must be downloaded to use it.
